Ammo Equipment
1991 Baird 3L-37

▪Variable Speed Servo Motors

▪4″ Stroke

▪14 Station Die Set; 13 draw 1 cup and blank

▪Meticulously Maintained

▪Under Power on Sellers Floor

▪One Owner – Original Purchasers, Custom Build from U. S. Baird

ATLM Ammo Packaging Machine

▪12 Boxes of .223 Rem plastic trays (Approximate count 11,955)

▪34 Boxes of .300 BLK plastic trays (Approximate count 34,885)

▪Trays purchased from Falcon Plastic

Waterbury Ferrel High-Pro Headers

▪New Pumps

▪New Motors

▪Tooling for 9mm, .223/5.56, .308/762 calibers lead cores

▪Can be tooled for a different caliber

Transfer Press Tooled for 5.56 Case Production

Case production machine available immediately tooled for 5.56 cases.

Transfer Presses
1991 Baird 3L-37

▪Variable Speed Servo Motors

▪4″ Stroke

▪14 Station Die Set; 13 draw 1 cup and blank

▪Meticulously Maintained

▪Under Power on Sellers Floor

▪One Owner – Original Purchasers, Custom Build from U. S. Baird


Asahi Seiki TP-45

▪Asahi Seiki, (US Baird Design) STP-45 Transfer Press, 1995.9 vintage, in very good condition

▪12 stations

▪12 punch holder blocks

▪full bank of 11 delayed stripper rack

▪full bank of die block holders, with every 3rd one with rollers on top for slide

▪triple blank, station zigzag, or single

▪Blank station is double action to cup on blank

▪Full bank of lower pushup rods

▪Full bank of lower rockers and pushup cams

▪2.56″ stroke, (65mm)▪variable speed, with other accessories, from Light Curtain, to discharge chute, with a door to catch parts,

▪Three manuals, including one with many drawing of the machinery working parts

▪220 volt, 3 phase, 60 amps service needed

▪40-150 SPM/PPM

▪Can be tooled at additional cost for limited .308 projectile or 9MM Case

Asahi Seiki TP-25

These machines are in excellent condition as they were only used for light material production. Multiple machines are available!

This machine includes:

  • Stagger Feed
  • Payoff Reel 
  • Chopper
  • Die Sets 
  • Probing
  • Electronic safety curtains


Asahi Seiki TP-15

These machines are in excellent condition as they were only used for light material production. Multiple machines are available!

This machine includes:

▪1.5 inch stroke 

▪Payoff Reel

▪Chopper

▪Die Sets 

▪Probing

▪Electronic safety curtains


Tool Room Equipment
Un Coiler Horizontal Pallet Decoiler

▪Asahi Seiki, (US Baird Design) STP-45 Transfer Press, 1995.9 vintage, in very good condition

▪12 stations

▪12 punch holder blocks

▪full bank of 11 delayed stripper rack

▪full bank of die block holders, with every 3rd one with rollers on top for slide

▪triple blank, station zigzag, or single

▪Blank station is double action to cup on blank

▪Full bank of lower pushup rods

▪Full bank of lower rockers and pushup cams

▪2.56″ stroke, (65mm)▪variable speed, with other accessories, from Light Curtain, to discharge chute, with a door to catch parts,

▪Three manuals, including one with many drawing of the machinery working parts

▪220 volt, 3 phase, 60 amps service needed

▪40-150 SPM/PPM

▪Can be tooled at additional cost for limited .308 projectile or 9MM Case